Convert Outlet to Light Fixture

One of the hallmarks of a beautiful home is its lighting. Many options are available if you want to add a touch of primary or need some basic light for daytime tasks. Amongst many, one popular option is converting old outlet lights into light fixtures. This can be a terrific way to freshen up an area and add light where required without installing a new fixture.

If you are interested or planning to do such a conversion, read on to learn how to do it!

How Do I Convert an Outlet to a Ceiling Light?

If you have an unused outlet that you would like to convert into a ceiling light, there are a few things you will need to do. First, find the correct electrical outlet box. This is done by checking the outlet’s cover or plug or looking at your home’s wiring diagram. Once you have found the correct box, remove the cover and unscrew the mounting screws. Next, remove the electrical wires from the outlet box and replace them with wire connectors. Significantly, ensure the connectors’ colors match precisely those on your new light fixture. Finally, screw in your new light fixture and replace the cover.

Converting an outlet into a ceiling light

Can You Convert an Outlet to a Light Switch?

Outlets can be converted to light fixtures by simply connecting a wire to the outlet and screwing in a light bulb. Moreover, if the outlet is not reachable, you can join the wires using an electrical junction box.

Can I Connect a Light to an Outlet?

There are a few different ways to connect a light to an outlet. One option is to use an adapter. Another option is to use a light-emitting diode (LED). However, both of these options require some modification to the outlet.

An adapter connects two different types of electrical wiring. An outlet can be converted into a light fixture by using an adapter and connecting the LED’s power supply to the adapter’s plug. This method is easiest if only one type of outlet is available, but it can be more difficult if multiple outlets are available.

A light-emitting diode (LED) requires no adapter, but it requires that the cord be shortened to reach the outlet without bending or stretching too much. Additionally, the cord can be cut off or shortened by connecting one end to another piece of equipment, such as a power strip or another LED, and then extending the other end into the wall socket.

Can You Wire a Ceiling Light to an Outlet?

If you want to wire a ceiling light to an outlet, there are a few things you need to know. First, the light fixture must have two prongs. The second thing you need to know is the wattage of the light bulb you’re using.

Can you wire a ceiling light to an outlet?

A 60-watt incandescent light bulb is the most popular type of light bulb used in lights. If your ceiling light uses this bulb, it will require a GFCI (ground fault circuit interrupter) outlet to work.

What You Will Need

To convert an outlet to a light fixture, you will need the following:

  • An outlet adapter
  • A light fixture
  • A power drill
  • A Phillips head screwdriver
  • Wire cutters
  • Tape measure
  • Jigsaw
  • Paint or a sealant

Start by measuring the distance between the outlet and the light fixture. This will be your cutting guide. Use the power drill to make a hole in the wall near the outlet. You may need to use the tape measure to determine where to make the hole accurately. Make sure it is large enough for your adapter and light fixture. Insert your adapter into the hole on your wall and tighten it with the Phillips head screwdriver. Slip your light fixture onto the adapter and secure it with screws if necessary. Turn your power to your outlet and test it by plugging in some appliances. You’re ready to paint or seal your new light fixture if all goes according to plan!

How to Do It

The chances are that you can use a broken outlet as a light fixture. Take these simple actions:

  1. Switch the switch to the OFF position to turn off the electricity to the outlet.
  2. Remove the cover plate that covers the outlet.
  3. Separate the two wires into the outlet using a wire stripper or pliers. Be careful not to cut either wire in half!
  4. Strip 1/2 inch from one end of one of the wires and twist it around, so it fits into one of the holes on the bottom of the light socket. Secure with a screw; repeat with the second wire.
  5. Replace the cover plate and plug-in power supply; test by turning on the light. If everything works, replace the knob and install a new cover plate!

Tips for Success

  • Consult with a qualified electrician to install the outlet conversion kit.
  • Use an existing light fixture as a guide when installing the outlet conversion kit.
  • Ensure that the new outlet is wired correctly and plugged into an electrical outlet.
  • Test the new outlet by turning on the light switch in the room where the new outlet will be used.


Outlet covers can be a great way to transform an unused space into something useful, but they can also be a pain to install. This tutorial will show you how to convert an outlet cover into a light fixture in minutes. All you need is some electrical tape and a few tools, and you’ll have your new light ready for use in no time.

Leave a Comment

Your email address will not be published. Required fields are marked *