Craftsman 315 Garage Door Opener Battery Type

Craftsman Garage Door Openers provide the convenience and security of keyless entry with a simple push of a button. There’s an extra quiet belt drive opener or heavy-duty chain drive unit that’s right for every household. The myQ app helps you to control your outdoor access keypad. It allows you to remotely unlock the front door, change your settings on the thermostat and monitor the temperature, among many other things.

Check out their website for available garage door openers. This article discusses the battery type of the craftsman 315 garage door opener, which is expected to last for three years on average.


What is the battery in my Craftsman garage door opener?

A garage door opener battery is a device that can propel or drive an electric opener to open and close a garage door. There are two types of batteries, the 315 types and the X10 type. The 315 type battery is round and is flat, while the X10 type battery is rectangular with rounded edges.

The Craftsman Garage Door Opener has a powerful 12V 5AH battery and is UL listed. This opener was built with enduring, rugged construction and had a 3 Year Warranty.

Most garage door remotes use either a lithium-ion or 1.5-volt alkaline battery, which will need to be replaced every two years.

There are many 1.5v batteries, including AA, AAA, AAAA, N, C-cell, and D-cell. AA and AAA units, which are thicker than AAAA batteries, are available in alkaline and lithium batteries. Alkaline 1.5v batteries have high capacities and are better for running high-drain devices.

You can also use Energizer CR2032 Lithium Battery 3V Coin Cell (Value Pack of 2) or a 3v Liftmaster Cr2032 in this remote.

How long can I use a garage door backup battery?

The battery inside the garage door opener is charged through a solar panel on the roof and lasts approximately one to two years. This battery is crucial as it allows the opener to work without plugging into an outlet.

Within a few minutes, you can replace the battery, and you won’t have to worry about getting locked out of your device. The battery status LED alerts the battery needs replacing.

After Battery Replacement, As a result, homeowners may need to reprogram the garage door opener whenever the batteries are changed. Although this is unnecessary for all garage door openers, many of the models used in today’s world require reprogramming after battery replacement.

This video shows changing the battery in the craftsman 315 garage door opener.

How do you reset the remote?

To reset your remote, press and hold on to the “Learn” button for six seconds or until the indicator LED turns off.

This will deactivate all of your remotes. You may need to re-sync the remote by pressing the “Learn” button on the motor unit. Within 30 seconds after pressing “Learn” on the central unit, press the button on the remote you wish to reprogram.

This is a convenient way to quickly learn from your device without searching through different menus and options.

Issues opening a craftsman garage door opener

Due to some obstructions, you may face problems opening the Craftsman 1/2 HP Garage Door Opener. So make sure the fuse box is working, there are no circuit breakers that need to be replaced, and the outlet has power. If the garage door had been repeatedly used, it might have tripped the overload protector in the motor. When checking the door, pay close attention to any signs of obstruction, including damage to the hinges, latches, or hardware and during winter, check the bottom for snow or ice.

Contact the shop for solutions if you face issues figuring out how to hardwire the receiver. You can also replace the hardwired button with a simple button.

Other Recommendations for Garage Door Openers

Chamberlain Group is the company that took over the brand LiftMaster, Chamberlain, Merlin and Grifco. This company designs and engineers residential garage door openers, commercial door operators, and entry gates. Their products are geared to aid in the improvement of home accessibility.

However, Chamberlain doors are do-it-yourself type garage door openers, while LiftMaster garage door openers are professional installers. Liftmaster makes the centre beam in one solid piece (8ft long). Chamberlain is three sections to make it fit in a box.

Make sure the springs on your door are good. Try unhooking the door and lifting it halfway. If the door remains there without support, then it is ok. If it drops or lifts, the springs need to be adjusted. Call a professional in the case of spring adjustment. They have the proper tools to avoid getting hurt with the springs.

Genie and Chamberlain are two of the most popular garage door openers on the market. The Genie is a battery-operated, smartphone-controlled opener that can be installed within minutes. At the same time, the Chamberlain is a wired opener that requires a bit more time and effort to install.

The Chamberlain 3/4 horse unit is a considerable improvement and easy to install. If you have used Genei, you will realize Chamberlain is quieter. The open limit switch assembly of Genei is somewhat unreliable, and you will need to improve the electrical connection to stop the door from ramming into the powerhead every time the door is opened.

Liftmaster is more of a premium brand and needs professional installation. It seems to be a dealer only, commercial quality brand. It is the best and the most reliable market worth for your money. Genie and Chamberlain are consumer quality brands.

If you want a quiet garage door opener, go with a belt drive. For example, you can buy a Chamblerlan one from Lowe’s that’s like 1.5 hp which comes with a keypad, two remotes, battery backup. It also connects with WiFi to the app giving you access to control from the phone. The installation will take no more than three hours.

Leave a Comment

Your email address will not be published. Required fields are marked *