Do you Know about the 2006 Chevy Malibu Key Fob Programming? If you have just bought a 2006 Chevy Malibu, or happen to have an extra key fob lying around, then you may be wondering how to program it.
The good news is that it’s a pretty simple process, and this blog post will walk you through all the steps. Keep in mind that you will need to have both of your key fobs with you to complete the programming procedure. Ready to get started? Let’s go!
Contents
What you’ll need:
2006 Chevy Malibu (with dual locks and remote start), and an Extra Key Fob (for programming).
Programming the remote:
To program your new or spare key fob, you’ll need to go outside with your car. Begin by inserting one of your currently working key fobs into the driver-side lock cylinder. While your first key fob is still inserted, open the door. Leave that door open for now.
Now, find the programming socket on your vehicle’s inner driver-side B-pillar (the vertical metal structure between the doors) and press your second keyless remote firmly against it. Apply pressure for five seconds to ensure a strong connection. Then, press your remote’s “program” button.
The locks will cycle, confirming that the learning process has begun. At this point, you can release the programming key. The locks should cycle three more times to indicate that they have accepted your new key fob.
Your second key fob is now programmed! To finish up, remove your original key fob from the driver-side lock cylinder and close the door.
Non-remote start models:
If your vehicle is a non-remote start model, you’ll follow all of the same steps above, with one slight difference. You’ll need to do this entire procedure twice to complete programming. The first time through, press your remote’s “program” button while it is still inserted in the driver side door. The locks should cycle three times to confirm the successful programming process, and you’ll be set.
The second time through, do not press your remote against the vehicle until instructed to do so. Follow all of the same steps as above, inserting your remote as your first key fob and opening the driver side door, but do not press the remote against the programming socket until instructed to do so. When you are ready, follow the prompts given by the instructions in your vehicle’s manual.
Troubleshooting:
If you followed all of these steps and could not program your new key fob, there are a few possible explanations. First, double-check that you followed all of the instructions correctly-check to make sure that both doors were open and unlocked when inserting your remote for the first time. Second, be sure that you didn’t accidentally lock your keys in the car before trying to program your new key fob. Also, you might be out of programming attempts. If you have tried these steps multiple times and still can’t program your remote, then the problem is probably with the remote itself, not your vehicle. In this case, try using a spare key to enter and start the car instead.
Where can I find replacement remotes?
Programming kit:
If you have tried all of the steps above and still cannot program your remote, or if you don’t want a second key fob cluttering up your pockets, then there is another option. You can order a replacement remote from an online parts store for around $55-$60 plus shipping. These remotes are programmed at the factory and should work right out of the box.
Replacement keyless entry:
If you’d rather not pay for a replacement remote or your original key fob has broken beyond repair, then there is one more option. You can replace your keyless entry system complete with an aftermarket unit from an auto parts store. This is a more expensive option but will get your vehicle back up and running in no time.
Frequently Asked Questions (FAQs)
How Do You Program A Key Fob For A 2006 Chevy Malibu?
The process of programming a key fob to your 2006 Malibu varies slightly depending on if the car is the remote start or not. You must program two key fobs for this vehicle.
How Do You Program A 2006 Key Fob?
Programming a 2006 key fob starts with inserting the first key you wish to program into your Malibu driver side door lock. You must hold this key in place until instructed to remove it. Next, insert the second key you wish to program and press the “programming” button on this key for five seconds. Then, release the programming button. You must remove this key from the door lock and press it back in for five seconds with no gaps between the two actions. Then, do the same action on your original key inserted in the driver-side lock cylinder. The locks should cycle three more times to indicate that they have accepted your new keys as valid.
How Do You Program A Chevy Malibu Key Fob?
First, insert the key you wish to program into your Malibu driver door lock cylinder. You must hold this key in place until instructed to remove it. Next, insert the second key you wish to program and press its “programming” button for five seconds while still inserted in the driver’s door. Then, release this same button. You must now press the “programming” button on your original key for five seconds, but be sure to hold it in place during this time as well. Then, remove the first key and cycle your power locks with this same key three times to indicate that they have accepted the new key. Finally, insert either of your newly programmed keys into your Malibu’s driver side door and press the button on the fob for three seconds or until your locks cycle.
How Do You Reset The Security On A 2006 Chevy Malibu?
The process of resetting the security on a 2006 Malibu is the same as it would be for any other GM vehicle that uses Sensing and Reporting Electronic Security System (SERS) technology. Start by inserting your key into the driver-side door cylinder and turning it all the way to lock, but not past this point. Now, press the “SEC” button on your new key for 10 seconds. Then, turn your old key in the lock all of the ways and pull it out slightly so that you can feel a gap between the fob and the cylinder. Next, turn this key back to the lock and remove it from the door handle. Now, press the “UNLOCK” button on your new key for five seconds. Once you do this, press the “TRUNK” button on your original key fob and open your Malibu’s trunk. Finally, insert your original key into the driver-side door lock once more and turn it all of the way back to unlock.
Final Verdict: 2006 Chevy Malibu Key Fob Programming
If you have a 2006 Chevy Malibu and need to program your key fob, we can help. Our experts will walk you through the process of programming your new remote, so it works with your vehicle. We make sure each customer is satisfied before they leave our lot!
