GTE Sylvania Circuit Breaker Replacement

You may have wondered: Does my Sylvania electrical panel need a replacement? And what should I look for in a replacement? Here are some tips to help you out. First, make sure that you’re not replacing a Zinsco-style panel. GTE Sylvania bought Zinsco and produced a similar style under the GTE name. You might want to create a new thread if your panel is a different style.

What Breaker Replaces A Sylvania Breaker?

A Sylvania breaker is a type of circuit breaker used in electrical panels. These panels were popular during the 1970s, and many older homes still use them. But the circuit breakers in these panels no longer meet current safety regulations. Some have never even received a UL listing. GTE Sylvania, founded in 1931, produced residential and light commercial products.

Some homeowners have reported having problems with their Sylvania panels, which were common during the 1970s. The breakers on these panels can cause fires and shocks. They also corrode quickly and can melt into the breaker. Because of these safety hazards, some insurance companies have mandated that homeowners replace these panels.

When replacing a Sylvania breaker, the panel must be inspected by a licensed electrician to make sure that the new one is compatible with the panel. Some of these panels are exclusively designed by Zinsco or GTE Sylvania, so a different model may not be compatible. However, the Cutler-Hammer Type QBHW and BAB bolt-in breakers will work for Sylvania panels. You can also find a 3/4-inch QBHW breaker compatible with 240/120 Vac.

Another way to identify a GTE Sylvania meter is to look for its label. While there are different labels, they usually identify the type of electrical panel it is. The panel can also be labeled with the name of the manufacturer. The label should also tell you whether it is a Sylvania, GTE-Sylvania, or Zinsco design electrical panel. An electrician can show you the label and a side view of the panel to help you identify the type of breaker you need.

GTE-Sylvania electrical panels were popular throughout the 1970s. You can find them in many homes, and the name of the manufacturer will be printed on the breaker box and circuit breakers. Sadly, the company has since gone out of business, but many homes still have them in place. The Sylvania-ZINSCO design is prone to burn-ups and is not a good choice for modern homes. It is also prone to overheating.

Can You Use Eaton Breakers In A Sylvania Panel?

If you have a Sylvania panel, it’s likely that Eaton breakers are compatible with its circuits. While some Sylvania panels are dangerous, others aren’t. The problem lies in the design of the panels themselves. While most modern circuit breakers are designed with a single metal bus that connects to individual breakers, the GTE-Sylvania panels use a different design. Instead of having a single metal bus, a single main breaker controls the entire panel and can turn the power on and off throughout the house.

In addition to being compatible with Sylvania panels, Eaton breakers are also compatible with Challenger and Bryant panels. Eaton breakers are interchangeable with Bryant, Cutler-Hammer, and Siemens breakers. Eaton makes a wide range of circuit breakers that are UL-listed. Many of these breakers are compatible with other manufacturers, such as Siemens QP and GE. They are also easy to install. Eaton breakers are also compatible with Square D and GE breakers. However, you must ensure they are compatible with your panels.

To use Eaton breakers in a Sylvania panel, make sure the Eaton breakers are UL-listed and approved for that panel. The wrong type can result in poor bus stab contact and arcing. If you can’t find Eaton breakers compatible with the panel, you can try replacing the panel with one made by another manufacturer.

There are a few other things you should consider before replacing your breakers. Besides, you should always have the panel checked by an electrician. Before replacing the breakers, make sure you follow the manufacturer’s instructions. You don’t want to void the warranty.

To use Eaton breakers in a Sylvania panel, make sure the breakers have the same breaker size. Whether using Eaton or Cutler-Hammer breakers, make sure they are UL-listed and UL-classified. Split-bus panels are not dangerous by themselves, but you should make sure the breakers are in the correct position. If the breaker is not in its proper position, it could slide down or get stuck. This can damage the bus bar and the breaker. If stuck, it could cause an arc or a fire hazard.

Do Sylvania Panels Need To Be Replaced?

The Sylvania panel is an electrical panel that comes in several colors. It is typically installed in older homes. Some homeowners have problems with the wires in the panels, and the panels themselves can become too hot. Because of this, many insurance companies will not insure homes with Sylvania panels.

While the panels are not dangerous, it is vital to have them checked regularly by a professional electrician. The circuit breakers on these panels can become melted, and if left unchecked, can melt wiring and cause a home fire. If a former manufacturer makes your panel, you should call your electrician to check it out.

To identify the circuit breaker, look for the label on your panel. It should state Sylvania Electric catalog numbers and a 120/240 VAC rainproof enclosure type 3R. Alternatively, you can look up photographs of similar panels to find out which ones should be replaced. Make sure the panel you have does not have any yellow arrows, as these indicate it is not Zinsco-designed. If it does, it may not be safe to use and must be replaced.

You should also check if your electrical panel has been recalled. Some electrical panels made by Zinsco had faulty designs that led to fire hazards and electrical shocks. One of the first victims of this problem was an electrician in 1994, who had a severe burn after touching a Zinsco panel. During this time, most of the panels were rebranded as Sylvania/GTE-Sylvania.

What Is Wrong With Sylvania Electrical Panels?

If you have Sylvania electrical panels in your home, you might wonder what is wrong with them. These electrical panels are often faulty and could cause a fire. They may also be a source of electric shock and electrocution. For these reasons, it is essential to have an electrician check them out.

A common problem with Sylvania panels is that they allow the wires to become hot. This causes problems and can even melt the wires. This makes them a safety risk and many insurance companies do not insure homes with these panels. You might want to consider getting a replacement panel from a reputable company.

You can check the label if you suspect a Sylvania electrical panel is faulty. The panel will display the Sylvania Electric catalog number, the type of panel, and the voltage range. You can ask a professional home inspector to check it out if it doesn’t have this information. In 1973, Zinsco sold its panel manufacturing business to GTE-Sylvania. The latter continued to manufacture and sell the panels under the Sylvania-Zinsco brand. Eventually, the production ceased. However, the panels remained installed in homes and buildings for several years.

The new re-branded panels are not the same as the original ones. They might have been designed by a different company or the same company. The newer ones look similar to those manufactured by Zinsco, but they have a different design. Some electricians are wary of buying panels with a different company’s name.

Because of the increased electrical demands on these panels, they can overheat. The breaker contacts may even weld, creating a fire hazard. Additionally, the breaker switches may not function properly, and this can make the panel challenging to remove. In the worst cases, this could lead to a fire. If you have a Sylvania electrical panel in your home, it is essential to get it checked by a licensed electrician. The old panels can be dangerous and should be replaced with new ones.

 

Leave a Comment

Your email address will not be published. Required fields are marked *