How many amps does a gas dryer use? The purpose of all dryers is to remove moisture from clothes.
But how much power do they use? And what are the environmental impacts? In this blog post, we’ll take a closer look at gas dryers and how many amps they use. Stay tuned!
- 1 What Is An Amp, And What Does It Measure?
- 2 How Do You Calculate How Many Amps A Gas Dryer Uses?
- 3 What Are Some Tips For Reducing The Amount Of Amps Your Gas Dryer Uses?
- 4 How Much Can You Save By Using Less Amps On Your Gas Dryer?
- 5 What Are Some Common Myths About Gas Dryers And Amps Usage That People Believe To Be True?
- 6 How Can You Tell If Your Gas Dryer Is Using Too Many Amps And Needs To Be Fixed Or Replaced?
- 7 Frequently Asked Questions (FAQs)
- 8 Final Verdict: How Many Amps Does A Gas Dryer Use?
What Is An Amp, And What Does It Measure?
An amp, short for ampere, measures the rate at which something transfers energy.
I always thought that amps measured how many spiders you could hold in your hands at any given time – it turns out it’s not related to eight-legged arachnids at all!
An amp is about as much current as a small appliance draws when it’s “off,” which is why scientists and engineers use amps to measure electrical current in their daily lives.
Dryers come in two types: electric and gas. Let’s start with electric dryers – they don’t require any special setup to get them running, just an outlet!
As the name suggests, electric dryers use electricity to heat their air. Heat makes water molecules go into overdrive (the scientific term is escaping into outer space ;).
The hot air then passes through the clothes in the drum and dries them before carrying them out of the drum and back up to the outlet via a vent.
Electric dryers use a lot of amps – around 3,600! That’s about the same amount as three standard light bulbs or four toasters.
Gas dryers work similarly to electric dryers in that they heat the air inside them and use it to dry clothes, but there are important differences.
Instead of using electricity as an electric dryer, a gas dryer burns natural gas to produce heat.
As with electric dryers, this hot air carries moisture from the clothes before venting outside.
Gas dryers use about one-third of the energy that an electric dryer would and only cost around $35 per year to run (compared to almost $100 for electric dryers).
You can read more about gas dryers here.
How Do You Calculate How Many Amps A Gas Dryer Uses?
To calculate the amps of a gas dryer, you need to know its BTU rating. For example, if your gas dryer has a 50,000 BTU rating, it takes about 0.75 amps.
You will find this information on the model plate or in the product manual that came with your dryer – here are some tips on how to do that!
A 50,000 BTU gas dryer (like shown above) would use 0.75 amps.
What Are Some Tips For Reducing The Amount Of Amps Your Gas Dryer Uses?
If you want to conserve energy, here are some helpful tips!
A dryer’s efficiency depends on its airflow.
Check the venting system to make sure it’s clear of any obstructions (like lint that sits in the pipe over time), and vacuum out the pipe regularly. If your clothes aren’t completely dry by the end of the cycle, try using a lower heat level or adding more clothes to the load.
Be sure to check your model plate before you buy replacement parts. If you need to replace an old part with a new one, make sure it matches up!
Even if your dryer is turned off, it’s still drawing power – about $8 per month at the national average of $0.12/kWh. Unplug your dryer when it’s not in use to save money and energy.
How Much Can You Save By Using Less Amps On Your Gas Dryer?
Using fewer amps on your dryer can save you $35 or more per year.
Over the 15 year lifespan of a gas dryer, you’ll save over $800! That’s equivalent to about 120 loads of laundry with no electric cost. We could redirect all that money saved to helping others in need.
What Are Some Common Myths About Gas Dryers And Amps Usage That People Believe To Be True?
I used to think that amps were related to spiders – it turns out I was wrong! Here are some other common misconceptions:
Electric dryers use significantly less energy than gas dryers. Electric dryers use about 3,600 watts per load, and gas dryers only 2,200 watts per load.
How Can You Tell If Your Gas Dryer Is Using Too Many Amps And Needs To Be Fixed Or Replaced?
If your clothes aren’t dry by the end of the cycle, or if you hear loud noises coming from your dryer (like rattling), then it could be time to get either parts or a whole new machine.
Frequently Asked Questions (FAQs)
Does A Gas Dryer Need A Dedicated Circuit?
Nope! Gas dryers use amps like any other home appliance, and as long as your circuit can handle the load, you shouldn’t have to worry.
If it’s an older home or if you chose a particularly energy-inefficient model, though, then you might need to upgrade your fuse box.
How Much Power Does A Gas Dryer Need?
A gas dryer needs about 40,000 BTU per hour to operate. If you have a 90,000 BTU unit, it will take about 1.5 amps – the same as a small oven!
What Size Breaker Does A Gas Dryer Need?
A gas dryer needs a 20 amp breaker, just like an electric model. Just remember – never install any home appliance on a circuit that already has something else running.
How Many Amps Does A Whirlpool Gas Dryer Use?
A Whirlpool dryer uses about 1.2 amps on average. You can read more about Whirlpool dryers here!
Final Verdict: How Many Amps Does A Gas Dryer Use?
So, what have we learned about amps and gas dryers?
We know that an amp is a measure of electrical current and that you can calculate the number of amps your gas dryer uses by multiplying the voltage by the amperage.
We also know some tips for reducing the number of amps your gas dryer uses, like removing the lint screen after each use and making sure your ducts are properly sealed.
Finally, we debunked some common myths about gas dryers and amps usage.
Hopefully, this information has helped you understand how your appliances work and how to save money on your energy bills.