Many people know by now that refrigerator water filters are a must-have for processed water at home. They can also filter out lead or rust in the water, which is everything we’re looking for to make this process as safe as possible. Filters are measured by the micron rating, which reflects the ability of the filter to purify water. The lower the micron rating, the greater its ability to capture small contaminants.
The importance of maintaining the refrigerator and its water filters can’t be emphasized enough. Not only does this make it more efficient to use, but it also prevents illnesses from bacteria and other germs that could accumulate in these areas. One way is to replace the water filter from time to time. In this post, I will help you find the Kenmore Coldspot model 106 water filter location.
Contents
Kenmore Coldspot 106 features
This Kenmore refrigerator has a 20.7 cubic foot capacity. Inside, there is a built-in water filter and icemaker and digital controls for convenience. The freezer runs at 0 F and the refrigerator at 37 F. It can run between -5 to 5 F for the freezer and 33 to 41 F for the refrigerator.
The Coldspot 106 comes with an in-door ice and water dispenser that offers 2 options for ice and chilled water. You can choose between cubes or crushed ice or enjoy chilled water.
The fridge has a total of about 15.3 cubic feet and features glass shelves that are easy to access. The unit also includes a handful of features, such as a divider for vegetables, meat drawers, and covers that keep it fresh.
If there’s room left in your fridge, you can use the drawers as storage. The doors include meat and dairy compartments with their own temperature controls & a crisper drawer with a humidity controller. A shallow inserted vegetable tray lets you store delicate vegetables at a higher level without being crushed by heavier ones.
Finding the location of Kenmore Coldspot water filter
The easiest way to filter your water is using your refrigerator. The grille on the bottom of the refrigerator or the back, upper-right corner of the fridge’s inside, is where you’ll find a water filter. In some instances, older models have the filter on the outside at the back of the fridge connected to a water supply line.
The place of the filter depends on the type of refrigerator. Kenmore 106 model is a French Door fridge, which means there will be the lowest shelf. Make sure the door is closed and identify where the lowest shelf/compartment is.
If you failed to locate the filter compartment, you could still refer to your manual for additional help. You can also look for a small dial around the drawers.
Once you locate it, push or pull the button to open the compartment. Now you will see the filter.
How to take out the old filter?
To remove the old water filter, you have to twist the grip in a half-turn anti-clockwise direction. There should be enough play for you to pull out the old filter once it’s loosened up enough.
Make sure you loosen the water filter before removing it from the place. If it is not loosening, pull it in a straight direction.
When the filter is out, place a towel underneath because there might be a little water coming through.
Do I need to turn the water off when changing the filter?
Besides the above, do you have to turn the water off to change the refrigerator filter?
Many refrigerator water filters today have a manual stop tap that can be opened when needed. This means you won’t be wasting any water when replacing your filter. So you should not worry about identifying where the water supply valves are on the fridge.
How do you install a new water filter?
First, take out the new filter and look for the cap for the seal. Once you find that, twist it off to reveal the port where you will insert water.
Like those offered in this pack, this port connects the Kenmore water filter to your Kenmore refrigerator. If your water filter has a foil cover, remove it before installing it in the fridge.
If you want this new water filter to be installed onto your fridge’s waterline and filter line, please install it horizontally and screw it tightly.
Turn the filter in a clockwise direction to make sure it’s correctly fitted. If so, close the compartment to seal it in place. If you are having difficulty fitting the filter in, push its port into the outside end of the filter.
How to reset the filter?
Once installing the new filter, press the reset button near the dispenser. Press down the button for at least 3 to 5 seconds to activate the switch. Then it will smoothly work with the new water filter.
How can I remove a stuck water filter?
Put a cloth over the water filter cap. So this will prevent it from getting infected and keep it clean in future.
To tighten the water filter cap, use standard pliers and lock onto the cap. Turn it a quarter turn. Don’t put too much pressure or excessive force on the water filter, and it should maintain its quality better.
To replace the water filter in your refrigerator, unplug and remove the bottom grill. Follow the instructions in your installation guide to help you access the water filter cap easily.
Finally, pull the water filter straight out of the refrigerator.
How do you change the whole house filter?
Whole house water filters are systems that should be installed at the main water line of your home. Once installed, they treat every inch of water flowing, including faucets, showers, and even washing machines. They ensure everything is clean and safe from dangerous contaminants.
Whole-House water filters are point-of-entry filters. POE devices allow water to flow into your home, and these only allow the filtered water to be distributed throughout the house.
Here is a step by step guide to change the whole house filter.
Please turn the water off at both the inlet side of the pre-filter and at the outlet side to prevent damage.
Then relieve pressure and unscrew the housing.
Now you can remove the filter and clean the filter housing inside.
Once you finish cleaning, replace the filter.
Screw the housing back and turn the water on.
How often should I change the filter?
As refrigerator filters remove contaminants and particles, they can quickly get clogged. You should replace the filters every 6 months if water quality is a concern for you.
If you don’t change your filter, you will use harmful bacteria, chemicals, and particles that have entered the water tank.
Some refrigerators don’t have indicator lights, making it easy to forget to replace their filters. It’s usually out of sight so that they can be bypassed with time.
Be sure to set a reminder for yourself to replace your refrigerator water filter.
