RV Hydraulic Leveling Jacks Leaking

RV Hydraulic Leveling Jacks Leaking – 5 Best Ways To Fix Leaking

Is your RV Hydraulic Leveling Jack Leaking? If so, you’re not alone. In this blog post, we’ll discuss the common causes of leaks and offer tips on how to fix them. Keep reading for more information.

How Do You Fix A Leaking Hydraulic Jack On A Camper?

If you have a leaking hydraulic jack on your camper, there are a few things you can do to fix it. First, check the seals and O-rings. If they are damaged, you will need to replace them. Second, clean the area around the leak with a degreaser and apply a sealant.

4 Easy Steps to Fix A Leaking Hydraulic Jack

Followings are the best ways to help you fix a leaking hydraulic jack.

Identifying the Leak

First thing you need to do is find where the leak is coming from. This can be done by using a flashlight and looking for any wet or greasy areas. Once you have found leak, then clean the area with a degreaser.

Cleaning the Pooling Liquid

Once you have found and cleaned the area around the leak, the next step is to clean up any pooling liquid. It can be done with a paper towel or a rag. Be sure to dispose of the used paper towels or rags in a sealed bag, so they don’t leak again.

Fixing The Cause of Leak

The next step is to fix the cause of the leak. If the seals or O-rings are damaged, you will need to replace them. If the cause of the leak is not obvious, you may need to consult a professional.

Preventing Future Leaks

Regularly check the seals and O-rings on your hydraulic jacks to prevent future leaks. You should also check the area around the jack for any leaks. If you find a leak, ensure to fix it right away.


The JackAfter you have fixed the leak, it is important to test the jack to ensure it is working properly. To do this, raise and lower the jack a few times. If it seems to be working properly, then you are all set. These are just tips on how to fix a leaking hydraulic jack.

How Do You Lubricate RV Leveling Jacks?

Maintaining your RV leveling jacks is important to ensure a smooth camping trip. It would be good if you lubricated your RV leveling jacks every six months, which can be done easily at home. The first step is to clean the area around the jacks with a damp cloth. This will remove any dirt or debris that could prevent the lubricant from working properly.

Next, apply an adequate amount of lubricant to the moving parts of the jack, such as the gears and shafts. Be careful to avoid getting any lubricant on the brake pads or tires. Finally, operate the jack a few times to distribute the lubricant evenly. Your RV leveling jacks will provide years of trouble-free use with proper care and maintenance.

Can You Lift An RV With Leveling Jacks?

RV leveling jacks are a great way to keep your RV level, no matter where you park it. But can you use them to lift your RV off the ground? The answer is no. Leveling jacks are not designed to lift your RV, and attempting to do so could damage them. In addition, leveling jacks are not intended to be used as stabilizers. That’s what stabilizer jacks are for.

Stabilizer jacks prevent your RV from moving and rocking, making it more comfortable to walk around inside. So, if you’re wondering whether you can use leveling jacks to lift your RV, the answer is no. But, they’re still a great way to keep your RV level.

How Do You Bleed A Hydraulic Camper Jack?

Many campers enjoy the convenience of hydraulic jacks, which allow them to level their rigs with little effort. However, these jacks can develop leaks over time, making them less effective. If you notice that your jack is no longer working as well as it used to, it may be time to bleed the system. The process is relatively simple and only requires a few tools.

First, locate the bleeder valve on the jack. This is usually a small knob or lever near the unit’s base. Next, use a wrench to loosen the valve so air can escape. Finally, operate the jack until all the air is purged from the system. Once this is done, your jack should be working like new.

RV Leveling Jacks Not Working: Troubleshooting Tips | RV Repair Club

What To Use To Lubricate RV Leveling Jacks?

When you are ready to park your RV for the night, you want to level it out to be comfortable inside. Most RVs have leveling jacks on the corners that you can use to do this. But, to make these work properly, you must lubricate them first. Some people recommend using warm, soapy water to clean the leveler cylinder and spraying a dry lubricant, such as WD-40.

Others say you should use a silicone lubricant specifically designed for this purpose. Be sure to check with the manufacturer of your RV’s leveling jacks before using any products on them so that you don’t accidentally damage them.

Either way, once you have applied the lubricant, wipe off any excess so that it doesn’t attract dirt and grime, which could eventually clog up the workings of the jack.

How Do You Maintain RV Leveling Jacks?

Maintaining your RV leveling jacks is important to prevent rust and corrosion and to keep them working properly. Some recommend cleaning the leveler cylinder with warm, soapy water, spraying a dry lubricant, such as WD-40, and wiping off the excess. Other manufacturers recommend using a silicone lubricant.

Be sure to research your brand of jacks before using any products. If your jack is starting to show signs of rust or corrosion, you can remove the rust with a wire brush or sandpaper. Once you’ve removed the rust, you can treat the area with a rust inhibitor.

If your jack is squeaking, binding, or otherwise not working properly, it’s best to take it to a qualified repairperson for servicing. By taking good care of your RV leveling jacks, you’ll be able to enjoy many years of trouble-free use.


If you’re unsure whether your tires will fit on a new rim, bring the car in, and we can take a look. We can also help you decide if switching to a different size tire is the best option for your driving needs.

Leave a Comment

Your email address will not be published. Required fields are marked *