Whirlpool Dryer Door Switch Bypass – How To Bypass a Whirlpool Door Switch?

Whirlpool is a global manufacturer of home appliances with over 70 years of experience. The whirlpool dryer door switch is one of the most important safety features on their dryers. If the door switch is bypassed, the dryer will not start. There are a few ways to bypass a whirlpool dryer door switch, but doing so is not recommended as it can be dangerous.

Top Ways To ByPass a Whirlpool Dryer Door Switch

There are many ways to bypass the door switch on your whirlpool dryer, but we don’t recommend any of them. Why? Because it’s a safety feature there for a reason. Bypassing the door switch on your whirlpool dryer could result in serious injury or even death.

Use a Jumper

The first way to bypass a whirlpool dryer door switch is to use a jumper wire. Strip both ends of the wire. Then, take the two stripped wires and touch them together. This will bypass the door switch and allow the dryer to start.

Remove The Door Switch

The second way to bypass a whirlpool dryer door switch is to remove the door switch completely. This is not recommended as it can be dangerous. If the door switch is removed, the dryer will not shut off if the door is opened. This could lead to a fire hazard.

Use a Magnet

The third way to bypass a whirlpool dryer door switch is to use a magnet. Get a small magnet and place it on top of the door switch.

Can A Dryer Work Without A Door Switch?

Most dryers have a door switch that starts the dryer when the door is closed and shuts off the dryer when the door is opened. The switch is usually located on the frame of the door. If dryer is not starting when the door is shut, or if it starts when it is open, the door switch may be defective. Most models also have a Thermal Fuse on the blower housing or near the heating element. If this fuse has blown, the dryer will not heat. Check your owner’s manual to locate these parts. Once you have found and replaced these parts, your dryer should operate correctly.

How Do You Test A Door Switch On A Whirlpool Dryer?

Whirlpool dryers often malfunction due to a faulty door switch. If the door switch is not working properly, the dryer will not start. Testing the door switch is a relatively simple process that can be done with a multimeter. First, locate the door switch. It is usually located near the door opening. Once you have located the door switch, disconnect the power to the dryer. You can then test the switch’s conductivity by using a multimeter. If there is no continuity, the switch is defective and needs to be replaced.

How Do You Fix A Broken Door Switch On A Dryer?

A door switch on a dryer is a small but important component. Keeping the door closed prevents the dryer from operating when it is open, which saves energy and prevents accidents. If the door switch is broken, the dryer will not start. Fortunately, replacing a broken door switch is a relatively easy repair that can be done in a few minutes. The first step is to unplug the dryer and remove the front panel. Once the panel is removed, you can access the door switch. Simply unscrew the old switch and screw in the new one. Be sure to test the switch before reassembling the dryer. You can easily fix a broken door switch on a dryer with little time and effort.

How Does A Dryer Door Switch Work?

A dryer door switch is a simple device that helps to keep your dryer running safely and efficiently. The switch is located on the door, and when the door is closed, it creates a circuit that allows electricity to flow to the dryer. This electricity powers the motor, which turns the drum and circulates hot air. The door switch also turns on the interior light when the door is opened. If the switch is faulty, the dryer will not start or the interior light will not come on. To test the switch, simply open and close the dryer door while holding a multimeter against the two terminals on the switch. If the multimeter reading changes, then the switch is working properly. If not, then it will need to be replaced. A dryer door switch is a small but important part of your appliance, and by understanding how it works, you can keep your dryer running smoothly for years to come.

What happens if dryer door switch is broken?

One of the most important safety features of a clothes dryer is the door switch. This switch is usually located on the front of the door and prevents the dryer from operating when the door is open. If the door switch is broken, the dryer will not start. The door switch may also prevent the dryer from running if it senses that something is blocking the door from closing properly. As a result, it’s important to check the door switch regularly to ensure it’s working properly. If you find that the switch is broken, you should replace it as soon as possible to avoid any potential hazards.

How to Tell if the Door Relay Goes Bad on a Dryer?

The door relay may be to blame if your dryer doesn’t start or stops in the middle of a cycle. The door relay is responsible for telling the dryer when the door is open or closed so that it can start or stop running. Here are a few signs that the door relay may be going bad:

  • The dryer won’t start when you press the start button.
  • The dryer starts and then stops shortly after.
  • The dryer runs even when the door is open.

If you notice any of these signs, it’s best to check the door relay and replace it if necessary. Fortunately, this is a relatively easy repair you can do yourself with just a few tools.

Final Verdict

A door switch on a dryer is a small but important component. The switch prevents the dryer from operating when the door is open, saving energy and preventing accidents. If the door switch is broken, the dryer will not start. Fortunately, replacing a broken door switch is a relatively easy repair that can be done in a few minutes.

Leave a Comment